Craft/Misc

CRAFT & PRINTMAKING

CLAY & MODELING MATERIALS

EZ SHAPE MODELING CLAY 20-COLOR SAMPLER
#NDC20 This wax-based clay designed for young children is soft, clean, safe and easy to use. EZ Shape modeling clay has a long shelf life 

CRAYOLA AIR-DRY
CLAY BUCKETS
#57-5050 This fine, natural earth clay air-dries to a hard solid. No kiln or oven is necessary. Smoother, finer and less sticky than traditional clay, it’s easy to use 

CRAYOLA MODEL MAGIC
Non-toxic, non-greasy, very light modeling material dries in 24 hours and then can be painted and decorated. No firing or baking is needed
#57-4400 2lb Tub White 
CRAYOLA MODEL MAGIC 
#23-2402 Variety Pack
#57-4442 Blue 4oz
#57-4438 Red 4oz
#57-4401 White 4oz
#57-4434 Yellow 4oz
DAS AIR HARDENING CLAY
a very smooth and refined clay with an even and easy texture, clay is soft and pliable and usually dries within 24 hr. Acid-free & AP certified non-toxic.
#DIX-387000 1.1 lb
#DIX-387500 2.2 lb White
#DIX-387100 1.1 lb
#DIX-387600 2.2 lb Terracotta

SUPER SCULPEY
#393297 A modeling compound in a light peach color that bakes to be shatter-and chip-resistant

POLYFORM ORIGINAL SCULPEY OVEN-BAKE CLAY
#393296 This is an economical, easy-handling product for the novice as well as the mature sculptor

SCULPEY III SETS
#393283 These 10-Color Sets contain 2 oz. pieces of Sculpey III in assorted colors.
RIGID WRAP
#ACT 231 This plaster impregnated gauze is great for making masks or sculpting. It will follow any curve and dry quickly to plaster hardness without firing. Completely non-toxic

PERMASTONE
CASTING COMPOUND
#AV 350 This plaster-like casting compound dries to be super-hard. 

INSTAMOLD
#AV 250 Make perfect reproductions of 3-dimensional shapes in minutes with this ingenious water-activated, non-toxic, mold-making compound

SCULPTING &
ARMATURE WIRE
Perfect for creating an internal support structure for clay or wax sculpture The wire will not corrode or stain, and has a melting point of 1220 degrees F/660 degrees C.
#AA17311 1/16” #AA17313 3/16” #AA17314 1/4”

POTTERY TOOL KIT
#AA16201 All the basic pottery tools kit contains one each of these eight tools: loop tool, ribbon tool, potter’ s rib, needle tool, wood modeling tool, sponge, scraper and wire clay cutter.

PLASTIC MODELING TOOLS
#AA17301 Use these double-ended plastic modeling tools to shape, cut, smooth and contour modeling materials Durable and easy to clean.

DOUBLE ENDED
WIRE SCULPTING TOOL SET
#AA17302 These five double-ended tools  each 6-1/2" features high-strength, stainless steel wire loops fastened with brass ferrules to a varnished hardwood handle.

WIRE CLAY CUTTER
#AA17304 Constructed with a heavy-gauge, stainless steel wire fastened between two hardwood toggle handles. 
 
CLAY ROLLER
 #AA17305 Roll and condition clay into smooth sheets of uniform thickness with this 3-1/2" wooden roller features a wire handle.

PROFESSIONAL
NEEDLE TOOL
#AA17307 The sharp 1-1/2" needle is set in a finely textured handle that provides a firm grip. Featuring strong, light-weight aluminum construction, it measures 6-3/4" in total length.

CLEAN UP TOOL
#AA17308 Featuring a double-ended design with two stainless steel blades to intricately trim, smooth, or clean up your project. 

WIPE OUT TOOL
#AA17309 This double-ended, rubber-tipped tool, solvent-resistant tips are fastened with brass ferrules to a varnished, hardwood handle. Ideal for sculpting, ceramics, doll making and painting.

CUT OFF NEEDLE TOOL
#AA17310 Thin 1-3/4" stainless steel needle set in an easy to grip hardwood handle, use to trim, poke and etch fine designs in clay.

8” BOXWOOD
MODELING TOOL
#AA17340 This 8" modeling tool is made of finely sanded boxwood with a smooth, natural finish. Use it to shape, cut, smooth and contour clay and other modeling materials.

STAINLESS STEEL LOOP TOOL
#AA17341 The stainless steel ribbon loop measures 1-3/4" wide and is attached to a hardwood handle.

FETTLING KNIVES
#AA17343 Soft knife may be bent 
#AA17342 Hard knife is tempered to have a spring-like feel. Both knives feature a 4-3/4" stainless steel blade and have a hardwood handle.

STAINLESS STEEL CALIPERS
#AA17344 Durable and light-weight, these 8" stainless steel calipers can be used to measure both inside and outside dimensions.

MINIATURE BOXWOOD MODELING TOOLS
#AA17347 Made of finely sanded boxwood with a smooth, natural finish, they offer a full range of utility for detailed work.

DOUBLE BALL STYLUS EMBOSSING TOOL
#AA17348 This wooden-handled stylus features a small stainless steel ball point on one end and a medium ball point on the other. 

LACE TOOL
#AA17349 This double-ended tool has a stainless steel curved blade on one end and a needle on the other. 

STAINLESS STEEL
SERRATED SCRAPER
#AA17350 This scraper is made of thin, flexible spring stainless steel, and has a serrated edge.

POTTER’S FINISHING RUBBER RIBS
Smooth, shape, finish clay and other modeling materials with these pliable rubber hand tools 
#AA17351 Sm./Hard
#AA17353 Lrg./Hard
#AA17352 Lrg./Soft


LEAFING

LIQUID LEAF
Achieve the look of traditional leafing with this metallic paint. For use on wood, metal, glass, ceramics, paper, plaster or plastic .75 oz. bottles.
BRUSH N LEAF METALLIC PAINT
Lustrous gold-leafing wax-based paint for antiquing, decorating, striping or highlighting interior surfaces. One simple brush-on step 1 oz. bottles.
#76630K Gold

RUB ’ N BUFF METALLIC FINISHES
Lustrous wax-based metallic finishes for antiquing, crafts and decorating. Rub onto a surface with finger or soft cloth, then gently buff to a beautiful luster.
#76372M Autumn Gold
#76362B Gold 
#76361A Gold Leaf
#76371L Grecian Gold #76370K Silver

TEXTILE

IRON ON TRANSFER PENCIL
#731BX for fabric

FABRIC DYE STICKS
Soft and blendable color. Heat set with iron for permanency. Non-toxic
 #PTS-7 7-Color Set includes: black, blue, green, red, orange, yellow, white.
 #PTS-15 15-Color Set includes all of the above colors plus brown, blue green, dark green, gray, ochre, pink, sky blue and yellow orange.

STAINED BY SHARPIE
Brush tip fabric markers 
#177904 4pc #1779005 8pc

PROCION MX FIBER REACTIVE DYES
concentrated powdered dye which, when added to water, produces exceptionally brilliant color. for all natural materials such as cotton, rayon, linen, silk, wool, paper, reeds and wood

LUMIERE COLORS
Brilliant metallics  super-smooth, light body acrylics 2.25 oz. bottles.

 NEOPAQUE COLORS
Solid opaque colors super-smooth, light body acrylics 2.25 oz. bottles.
LUMIERE & NEOPAQUE EXCITER PACK
#JA C9900 Includes seven Lumiere colors: Metallic Bronze, Metallic Copper, Metallic Gold, Metallic Olive Green, Pearlescent Blue, Pearlescent Violet and Pearlescent White. Two Neopaque colors black and white in 1/2 oz. sample size bottles. 

TEXTILE EXCITER PACK
#JA C9904 This assortment includes nine Textile colors in 1/2 oz. sample sizes. Colors include: apple green, goldenrod, periwinkle, russet, scarlet, sky blue, turquoise, violet and white.

DYE-NA-FLOW EXCITER PACK
#JA C9908 Nine Dye-Na-Flow colors in 1/2 oz. sample size bottles colors: Bright Orange, Chartreuse, Golden Yellow, Magenta, Periwinkle, Scarlet, Sun Yellow, Turquoise and Violet.

TIE DYE KITS
#JA C9320 Features Procion MX fiber reactive dye, fuchsia, turquoise and yellow, soda ash dye fixer, rubber gloves, rubber bands and an extra squeeze bottle for mixing pastels or secondary colors Instructions 

FUNKY GROOVY TIE DYE KITS
#JA C9444 Everything needed to tie dye five T-shirts– rubber gloves, red, blue and yellow pre-measured dye in applicator bottles, rubber bands and dye fixer.

MINI INDIGO TIE DYE KIT
#JA C9410 This kit includes pre-reduced Indigo dye, reducing agent, gloves, two sizes of rubber bands, two wood blocks, quick start instructions and an instruction booklet with dye patterns and historical overview of indigo. 


SODA ASH 
A mild alkali; necessary to activate and set Procion dyes
#JA CHM1007 1lb #JA CHM2007 5lb

UREA
#JA CHM1008 1lb Urea helps to lengthen the reaction time in dyeing for more brilliant colors. It attracts moisture from the air to keep the fabric damp for a longer stretch of time.

COLOR REMOVER
#JA CHM1300 whitens fabric while removing dye and stains


DISCHARGE PASTE
#JA CHM1330 remove most fiber reactive colors, direct dyes and acid dye from fabric

PERMANENT DYESET CONCENTRATE
 #JA C1762 To set silk dye, simply let it dry, immerse in Permanent Dyeset Concentrate and water, let it sit and rinse. It may also be set by steaming. 


SYNTHRAPOL
#JA CHM1009 Synthrapol is used to prevent back staining, which will result if the excess dye is not removed when dying. It is a mild soap specifically made to suspend and carry the dye from the fiber. 


TJANTING TOOLS
A hardwood, varnished handle with a brass spout and barrel silver-soldered together and pressure-tested.
#9901101 Fine #9902101 Med. #990313 Large

BATIK WAX
#224235 One-pound tray of water-soluble batik wax.


YELLOW BEESWAX
#9901102 This 100% refined yellow beeswax comes in a 1 lb. cake for batik dying.


WATER BASED RESIST
#JA C1880 This water-based resist holds a crisp line without spreading and does not shrink or pucker when dry. It can be colored with any water-based dye and is screenable, odorless, alcohol-free and non-toxic.

NO FLOW
#JA C1880 No Flow is an anti-fusant that will inhibit the spreading of dyes on fabric dries clear and rinses out with warm water. Apply No Flow with a brush or sponge to the entire area you wish to write on or paint.


SCREEN PRINTING

SPEEDBALL FABRIC SCREEN PRINTING INKS
These non-toxic, non-flammable water-based inks are especially formulated for fabric screen painting, or silkscreening

SPEEDBALL FABRIC SCREEN PRINTING STARTER SET
#4504 This starter set includes six 4 oz. jars of fabric screen printing ink in black, blue, green, red, white and yellow. ink cleans up with water, contains no solvents, and is colorfast when properly heat set.

SPEEDBALL
DIAZO PHOTO EMULSION
#4579 This top quality photo emulsion produces sharp, high quality images. Used for direct application to the screen, this 26.4 oz. jar of emulsion is light-reactive, water-soluble and spreads easily. 

SPEEDBALL
DIAZO SENSITIZER
#4578 Mix Diazo Sensitizer with high-quality Diazo Photo Emulsion to activate the development of a stencil image. When mixed with Photo Emulsion, this solution can be stored up to three months at room temperature or up to six months in the refrigerator. In a 2 oz. bottle.

SPEEDBALL PHOTO EMULSION REMOVER
#4557 More effective than bleach. Simply apply the remover to both sides of the screen and scrub with a soft brush. 8 oz. container.

SPEEDBALL DIAZO PHOTO EMULSION KIT
#4559 An excellent kit for use in high-quality screenprinting. This new photo emulsion kit contains a 7 oz. jar of Diazo Photo Emulsion, a 1 oz. bottle of Diazo Sensitizer, a 7 oz. jar of Photo Emulsion Remover and complete instructions

SPEEDBALL
SCREEN DRAWING FLUID
#4567 Use with screen filler for a tusche-like or positive screen printing technique. Brush drawing fluid on all areas you desire to print and let dry. Then spread screen filler over the entire bottom side of the screen and let dry. Finally, the drawing fluid can be washed away with cold water, allowing for the area to be printed

SPEEDBALL SCREEN FILLER
#4530 Use Screen Filler to block out areas that you do not wish to print, or use it in conjunction with drawing fluid for tusche-resist and positive screen printing methods

VERSATEX SCREEN
PRINTING INKS
Designed for commercial silk screening this printing ink is heavily pigmented and permanent. It will not change the texture and softness of your fabric. Versatex colors are intermixable, water soluble, somewhat transparent and work best on light fabric. 

JACQUARD EXTENDER
may be added for pastels and translucent overlays. Mix colors with white for opaque pastels. Overlapping pastels yields new shades. Versatex will effectively print over light tones but will not hide dark tones.
#224184 4oz #224206 16oz

JACQUARD FIXER
Used instead of heat setting to fix Versatex textile paints and inks. Works for any Versatex paint & most other fabric paints. Always test first on specific fabrics.

SPEEDBALL
 FABRIC SQUEEGEE
#4492 This fabric squeegee has a hard wood handle and a 70 durometer rubber blade with rounded edges to force the maximum amount of ink through the screen.

SPEEDBALL
FABRIC/CRAFT SQUEEGEE
#4534 A 9" rubber squeegee for use with screen printing on fabric. The 65 durometer neoprene blade helps force the maximum deposit of ink through the screen and reduces binding when printing on fabric

SPEEDBALL
GRAPHIC/CRAFT SQUEEGEE
#4508 This flexible, 9" squeegee is for use with screen printing on paper, cardboard or wood. It features a neoprene blade with a square edge that is firmly fastened in a shaped plastic handle. Neoprene blades are suited for shorter print run.

SPEEDBALL SCREEN PRINTING FRAME
#4712 Frame comes with 12xx multi-filament screen fabric attached; features smooth wooden balusters that are metered, and securely fastened together. The fabric is cord-locked in grooves and can be easily tightened or removed

SPEEDBALL SCREEN PRINTING UNIT
#4505 An all-in-one unit complete with base, hinges, kick leg and 10" x 14" frame with fabric attached.

SPEEDBALL FABRIC SCREEN PRINTING TOOL KIT
#4524 Kit is the perfect start-up seT contains a 10" x 14" frame, a squeegee, one 4 oz. jar each of screen filler, drawing fluid and diazo photo emulsion, 1/2 gram of sensitizer, a paint brush and screen printing instructions.


BLOCK PRINTING

SPEEDBALL
 BLOCK PRINTING INKS
Created from pigments ground and milled to the ideal consistency for block/relief printing, these water-soluble block printing inks print in bold color and dry to a rich, satiny finish. 

SPEEDBALL LINO CUTTER ASSORTMENT NO.1
#41231 Adjustable chuck handle and lino cutters #1, #2, #3, #4, #5 & #6.

SPEEDBALL LINO CUTTER ASSORTMENT NO. 2
Two adjustable chuck handles, and lino cutters #1, #2, #3, #4, #5 and #6.

SPEEDBALL
LINOLEUM CUTTER REPLACEMENT BLADES
Finest quality steel Interchangeable blades fits the Lino zip Handle 2 each
#41201 Small V (1) #41202 Lrg V (2)
#41203 Small U Gouge(3)
#41204 Square Gouge (4)
#41205 Large U Gouge (5)

TESTRITE LUCITE BRAYER
Lucite rollers with brass bearings and finished wire handles. 
#TT 44LB  4”   #TT 46LB  6”

SPEEDBALL 4” POP-IN ROLLER BRAYER
 #41228 / #4128 Pop-in roller made of 70 durometer synthetic rubber. Hard rubber brayer is excellent for printmaking

SPEEDBALL DELUXE SOFT RUBBER BRAYER
The soft roller made from pure gum natural rubber has a ground, 20 durometer finish for smooth rollout on many surfaces. Each brayer is constructed with a heavy-duty steel frame and metal core that eliminate warping and are fitted with a plastic comfort grip handle.
#4126 4” #4129 6” #4170 1.5” #4171 2” #4172 2.5” #4173 3”

SPEEDBALL DELUXE HARD RUBBER BRYER
Hard synthetic rubber brayers constructed with a heavy duty steel frame and a plastic comfort grip handle. #4124 4”

SPEEDBALL
TEFLON COVERED BAREN
#4139 A baren is used for hand-pressured printing to improve contact between paper, ink and block. This one is Teflon-covered making it long-lasting.

SPEEDBALL 
LINOLEUM BLOCKS
Smooth linoleum surface mounted on wooden blocks tinted coating allows easy drawing and cutting. 
#4305 3” x 4” #4306 3” x 5”
#4308 4” x 6” 
#4307 4” x 5”
 #4309 5” x 7” #4311 6” x 8” 
#4312 6” x 9” #4313 8” x 10”
#4314 9” x 12”
Unmounted Linolleum
#4373 3” x 4” #4376 4” x 6”
  #4377 12” x 12”

SPEEDBALL
SPEEDY CUT BLOCKS
Faster, safer, and easier to carve than linoleum, these printing blocks made of eraser-like material are economical and come in several sizes. Both sides are carvable for added versatility
#4346 4” x 5.5” #4347 6.75” x 11”

SPEEDBALL
SPEEDY CARVE BLOCKS
Make your own personalized rubber stamps with these easy-to-cut rubber blocks. 
#4107 3” x 4” #4108 4” x 6”

SPEEDBALL
SPEEDY STAMP KIT
#4100 Kit contains: a 4" x 6" Speedy stamp block, a lino handle, a #2 V-shaped line cutter, a #4 U-shaped gouge, tracing paper a craft tips and idea brochure, plus five free images.



MISCELLANEOUS CRAFT

MEHNDI HENNA KIT
#JAC 9500/9* Create exotic temporary tattoos in the East Indian style using this henna dye kit. Everything needed to create your own body art is included. Tattoos last approximately 10 days.

 BOKU UNDO MARBLING SET
#15620 Set features six 12ml bottles of special marbling ink directions and design ideas 


MARBLING KIT
#JAC 9609 This marbling kit for paper and fabric contains six .5 oz. colors (yellow, red, violet, blue, white, and black), Methocel marbling medium, Alum sizing and complete instructions. 

ARMOUR ETCH GLASS ETCHING CREAM 
#15-0150 This cream is a fast-acting, specially formulated glass etching compound that lets you create permanent etched designs on windows, mirrors and household glassware. 

½ oz SQUEEZE BOTTLE
#ACC1795 With a .7mm Stainless Steel tip for fine detailing with paints, glues etc.. 

ATOMIZER SPRAY BOTTLES
High quality, translucent plastic sprayer bottles that produces a fine mist.
#SPB4 4oz #SPB8 8oz #SPB16 16oz

2PACK SYRINGE
#9900006 With tapered and needle tip

PEARL EX MICA PIGMENTS
These non-toxic, powdered pigments produce deep-luster metallic effects, extremely colorfast and stable. Can be fired in a kiln up to 600 degrees.

LUMIERE
3D ADHESIVE PAINT
Metallic, dimensional adhesive paint will firmly attach small and light weight objects onto surfaces.

MOUTH ATOMIZE
#ART-1600 Seamless, nickel plated brass, finest quality folding type mouth atomizer. For spraying directly from bottles or jars.

Share by: